Hex/Bin/DFU Flashing Tool
STM32 DFU Firmware Flasher
Firmware Flash
Enter DFU mode, connect the DFU device over USB, pick a
.bin / .hex file, then flash & verify.
Supports STM32 MCUs with ST's built-in USB DFU bootloader: C0, F0, F1 (F105/F107 only), F2, F3, F4, F7, G0, G4, H5, H7, L0, L1, L4, L5, U5 and WB.
Supports STM32 MCUs with ST's built-in USB DFU bootloader: C0, F0, F1 (F105/F107 only), F2, F3, F4, F7, G0, G4, H5, H7, L0, L1, L4, L5, U5 and WB.
1
Enter DFU Mode
Reboots the ESC into its bootloader via serial
2
Connect DFU Device
Not Connected
3
Firmware File
No Firmware Selected · —
4
Flash & Verify
0 Bytes Written · Idle
Console