Hex/Bin/DFU Flashing Tool

To flash firmware, first put the ESC into DFU mode. Then connect to the DFU device over USB. Select a firmware file (.bin or .hex) and click Flash and Verify.

1 — Enter DFU Mode

Send the DFU command via serial to reboot the ESC into its bootloader.

2 — Connection

DFU Device Status

Not Connected

Connect to the STM32 DFU device over USB.

3 — Firmware File: *.hex *.bin accepted

Firmware File Path

No Firmware Selected

Size

—

Select a .bin or .hex firmware file.

4 — Firmware Flashing

Progress

0 Bytes Written

Status

Idle

Erase, flash and verify the firmware.

Console